A ribbon blender is a light-duty blender mainly used for easy-to-mix powder components that are pre-processed like dried granules and pre-sieved powders. It is a low-shear mixer and is mostly used for solid-solid mixing. Solid-liquid mixing can also be achieved when a high shearing force is not desired. It occupies less headroom space for large volume mixing.
Principle of Ribbon Mixer Blender
Ribbon blenders operate
on the combined convection and diffusion mechanisms. Convective mixing is the
macro movement of large portions of the solids. Convection mixing occurs when
the solids are turned over along the horizontal axis of the agitator assembly. Diffusion
mixing involves the micromixing that occurs when individual particles are moved
relative to the surrounding particles. In the ribbon, blender diffusion occurs
when the particles in front of the ribbon are moved in one direction while
nearby particles are not moved or lag. Together, these two types of action
result in the mixing and blending of solids.
Construction of Ribbon Mixer Blender
A ribbon blender consists
of a U-shaped horizontal trough containing a double helical ribbon agitator
that rotates within, Fig.1. The agitator’s shaft is positioned in the center of
the trough and has welded spokes on which the helical ribbons (also known as
spirals) are welded. Since the ribbon agitator consists of a set of inner and
outer helical ribbons, it is referred to as a “double” helical ribbon agitator.
The gap between the ribbon’s outer edge and the internal wall of the container
ranges from 3 to 6 mm depending on the application. The internal and external
ribbon spirals are pitched to move material axially, in opposing directions as
well as radially. This combination promotes fast and thorough blending. The
agitator shaft is located within the blender container. A spray pipe for adding
liquids is mounted above the ribbons. For materials that tend to form
agglomerates during mixing, high-speed choppers can be provided for the disintegration
of the agglomerates.
The ribbon blender is
powered by a drive system comprised of a motor, gearbox, and couplings. These
blenders are generally powered by a 10 - 15 HP motor for 1000 kg of product
mass to be blended. The power requirement may range from 3 - 12 kW/m3
depending on the products to be blended. Top speeds are in the range of 300
feet/min are typical. The agitator shaft exits the blender container at either
end, through the endplates bolted or welded to the container. The area where the
shaft exits the container is provided with a sealing arrangement to ensure that
material does not travel from the container to the outside and vice-versa. The
blender assembly along with the drive system components viz. motor, gearbox,
couplings, and bearing supports is mounted on a supporting frame.
Working of Ribbon Mixer Blender
The feed material is
charged in the blender through nozzles or feed-hoppers mounted on the top cover
of the blender. The material is loaded by typically filling 40 and 70 % of the
total volume of the container. This is generally up to the level of the outer
ribbon’s tip. The ribbon agitator is designed to operate at a peripheral speed
(also known as tip speed) of approximately 100 m/min, depending on the
application and the size of the equipment. During the blending operation, the
outer ribbons of the agitator move the material from the ends to the center
while the inner ribbons move the material from the center to the ends. Radial
movement is achieved by the rotational motion of the ribbons. The difference in
the peripheral speeds of the outer and inner ribbons results in axial movement
of the material along the horizontal axis of the blender. As a result of the
radial and the counter-current axial movement, homogenous blending is achieved
in a short time. Blending is generally achieved within 15 - 20 min of a start-up
with a 90 - 95 % or better homogeneity. The particle size and its bulk density
have the strongest influence on the mixing efficiency of the ribbon blender.
Ingredients with uniform particle size and bulk densities tend to mix faster as
compared to ingredients with variations in these attributes.
After blending, the
material is discharged from a discharge valve located at the bottom of the
trough. The discharge can be fitted with any of various valves, viz.
slide-gate, butterfly, flush bottom, spherical, and other types depending on
the application. The operation of the valves can be manual or pneumatically
actuated. Ribbon blenders can be designed for multiple discharge ports. In a
ribbon blender, the material is discharged by rotation of the ribbon agitator.
It is practically difficult to achieve 100% discharge in the ribbon blender. A
higher clearance between the external periphery of the outer ribbon and the
container can result in unmixed spots at the trough bottom and can lead to
discharge problems.
Advantages of Ribbon Mixer Blender
- Ribbon blender is used for solid-solid mixing with relatively fast blending cycles with reproducible product quality.
- It requires very little maintenance even when subjected to frequent product changeovers.
- It is a cost-saving blender and is versatile in application to blend solids in combination with its ability to perform heating, cooling, coating, and other processes that make it a very popular blender.
- Ribbon blenders can be designed to operate in both batch and continuous modes and can have huge built-up capacities of 50 m3.
- It protects the motor and ribbon blender from overload. When the load is too large to block and rotate, the working liquid is ejected from the fusible plug to separate the working machine and the load, so that the motor and equipment will not be damaged when starting and overloading.
- This blender has stable start load features for the operation and effective isolation of the impact and torsional vibration of the equipment.
- When overloaded, the working liquid does not spatter.
- Hydraulic lift is stable, flexible, easy to operate and maintain, guide, safe and reliable.
- It is a small vibration mixing system with low noise.
Disadvantages of Ribbon Mixer Blender
- In this mixing equipment, the power consumption and mixing time is very high.
- The efficiency or effectiveness of mixing is lower than other types of mixers.
- The hydraulic coupler is not loaded with the inverter in general, and cannot adjust the rotating speed of the ribbon blender effectively.
- Although the loading of hydraulic couplings is easy, it can not improve the start-up performance of the ribbon blender.
- The ribbon blender cannot be cleaned during use.
Applications of Ribbon Mixer Blender
- Ribbon blenders are used to blend large volumes of dry solids.
- It can blend and mix dry free-flowing powders as well as wet materials.
- It is best suited for mixing bulk drugs, formulation compositions, chemicals, and cosmetic powders.
- It is used in the dry blending of components in capsule formulations.
- It can also be used in the lubrication of dry granules in large quantities.
- It heats, cools, and dries materials during the process.
- It is employed in coating solid particles with small amounts of liquids to produce formulations.
- It has applications in the mixing of nutraceuticals, cosmetics, and veterinary formulations.
- Its other applications include blending and mixing of abrasives, engineered plastic resins, pesticides and herbicides, animal feeds, epoxy resins, pet foods, bakery premixes, pigments, cake mixes, instant drink blends, fertilizers, plastic powders, carbon black, fire retardants, polyethylene, chemicals, gypsum, PVC compounding, leaning compounds, instant breakfast cereals, spice blends, and dietary supplements.
Make sure you also check our other amazing article on : Twin Shell Blender